This message is displayed after you have successfully calibrated the instrument touch screen. Click OK to exit.
Touch Screen Calibration Procedure:
You can calibrate the touch screen by selecting Tools/Instrument Preferences, then clicking on the Instrument Touch Screen page to perform the following steps:
Calibrate the touch screen, if desired, by clicking the Calibrate button, then press the reset button on the back of the instrument.
A series of prompts will be displayed. To continue with the calibration, follow the directions displayed. Reset the instrument as directed and follow the prompts using a non-sharp, pointed object (such as a blunt pencil or pen) to tap the touch screen at the indicated points.
Click the OK button when finished