Scaling Axis Window

Set up the lower and upper axis limits for the RealTime plot display area. You can choose to have the limits set automatically, using the data as it is collected, or you can choose to manually enter the axis limits desired. See the description of each type below.

• Lower Limits Auto: Use the Auto function to have the data limits automatically scaled to fit within the RealTime plot window.

• Lower Limits Manual: Use the Manual function to manually choose the data limits to be displayed on the RealTime plot window.

• Upper Limits Auto: Use the Auto function to have the data limits automatically scaled to fit within the RealTime plot window.

• Upper Limits Manual: Use the Manual function to manually choose the data limits to be displayed on the RealTime plot window.

NOTE: If you choose to manually set the axis limits, data that goes beyond those limits may not be displayed.

1. Select the Auto or Manual axis limit function for the Lower data limit. If Manual is chosen, you must also enter the desired lower limit in the entry field below the Manual button.

2. Repeat step 1 for the Upper data limit. (NOTE: You can have one Auto and one Manual axis limit.)

3. Click OK when finished.

NOTE: When a different axis signal is selected, the axis limits are always reset to Auto.